
Like-for-Like Re-Roof
A worn roof replaced with the same type of material, keeping the look of the home.
Roof replacement in Launceston is a big decision, so you should see why it is needed before you commit. We show you the condition of the existing roof and compare the options side by side.
Once the job is booked, we plan the strip-out around the weather so your home is exposed for as little time as possible.


A worn roof replaced with the same type of material, keeping the look of the home.

Heavy tiles replaced with a lighter steel roof, with battens altered to suit the new sheets.

One failed section replaced, such as a rear extension or a single roof plane.
New sheets or tiles over existing battens that are confirmed sound and suitable.
Adds new gutters, downpipes, valleys and flashings so old parts do not shorten the life of the new roof.
Adds new sarking or roof blankets while the roof is open, which is the easiest time to do it.
Your existing frame, roof pitch and budget narrow the choice before colour comes into it.
| Option | Characteristics | Typical applications | Considerations |
|---|---|---|---|
| Colorbond steel | Light sheet with a factory colour finish | Most re-roofs, including conversions from tile | Fewer laps and joins, but it needs correct fixing for wind |
| Concrete tile | Heavy tile with a surface coat | Homes already carrying a tile load | Generally lower material cost than terracotta, heavier than steel |
| Terracotta tile | Fired clay in natural colours | Homes where appearance is a priority | Holds colour well, with higher material and labour costs |
A re-roof touches more of the house than people expect.
Older roofs, eaves and flues may contain asbestos, which changes how the strip-out must be done.
Rot, sagging and undersized timbers need attention before a new cover goes on.
Some roof work needs building or plumbing approval, so we check what applies to your job.
We open up only as much roof as we can make watertight by the end of the day.
We assess the roof and frame, then compare materials with you.
You receive a written scope, with allowances for anything hidden.
Scaffold or edge protection goes up and the site is protected.
The old roof is removed in stages and battens are repaired as needed.
Sarking, cover and flashings are installed, and the site is cleared.
Your home stays liveable during most re-roofs if the work is staged well.
Open sections are closed or covered before we finish for the day.
Dust can fall through old ceilings, so we suggest covering items below the work area.
You will know which section is being worked on and when any access is needed.

Rusted sheets removed and a new steel roof fitted with new flashings.

Tiles removed, battens changed and a lighter steel roof installed.

Low section replaced with a profile suited to its shallow pitch.
We replace worn roofs in each of these suburbs.
Old iron and steep pitches on East Launceston homes need careful strip-outs.
View detailsGet an overall assessment of your whole roof.
View serviceCheck whether a targeted repair can buy more time.
View serviceNew builds and additions, rather than re-covering an old roof.
View serviceA restoration may suit tile roofs in sound condition.
View serviceProtect the new roof with regular check-ups.
View serviceLarger re-roofs for commercial premises.
View serviceThe most popular choice when changing material.
View serviceStay with tile for a classic look.
View serviceOlder cement sheet must be dealt with first.
View serviceThe size of the roof is only the starting point. Complexity, access and what we find beneath the old cover also affect the figure.
| Simple gable roof | Few valleys or penetrations and easier set-up |
|---|---|
| Hipped or complex roof | More cuts, flashings and labour |
| Tile-to-metal conversion | Includes tile removal and batten changes |
We generally do not recommend it. Removing the old cover lets us check the battens and framing, and avoids adding load or trapping moisture.
It depends on the scope and the building. Requirements in Tasmania vary by the category of work, so we confirm what applies before work starts and involve a building surveyor if needed.
Usually yes. It can be noisy and dusty, and you may want to cover belongings in rooms below the work area.
Timing depends on the size and shape of the roof, the weather and what is found under the old cover. We give you a realistic program with the quote.
Usually. Battens have to be spaced to suit the sheets, and we also check the roof pitch and flashings before recommending it.
Book an inspection and we will show you what condition the roof is in and what your options are, in writing.
Repeated leaks in different places usually point to a roof that is failing as a whole. So does rust that has moved beyond the laps and into the body of the sheets.
On tile roofs, watch for tiles that crumble or crack when walked on, and sagging lines that may point to a problem with the battens or frame.
Replacing a roof also creates a good opportunity to add sarking and insulation. These jobs are far easier while the old roof is off.