Leak Repairs
We test around flashings, laps, valleys and penetrations until we find the entry point, then repair it.
Roof Repairs Launceston
Roof Repairs Launceston: Find the Cause, Fix It Properly
Good roof repairs in Launceston start with finding where the water really gets in. The stain on your ceiling is usually some distance from the actual fault.
We check the roof above and around the problem, repair what has failed and show you photos. If the damage is too widespread for a repair to hold, we will say so.
- Leak tracing
- Flashings and valleys
- Tiles and metal sheets
- Storm damage repairs
Repair types
Roof Repairs We Carry Out
Flashing and Valley Repairs
Failed sealant, rusted valleys and lifted flashings are replaced or re-fixed so water runs where it should.
Tile and Sheet Replacement
Cracked tiles, rusted sheets and popped screws are replaced with matching parts wherever we can source them.
How urgent is it
Temporary, Targeted or Staged
Make-Safe Repair
A short-term measure after a storm or sudden leak. It limits damage until a permanent repair can be done.
Targeted Repair
A permanent fix for one fault, such as a split valley or a failed vent flashing.
Staged Repairs
Several faults prioritised so the most urgent work is done first and the rest follows on a plan.
Repair methods
How Common Faults Are Repaired
There is usually more than one way to fix a fault. Durability is what separates them.
| Option | Characteristics | Typical applications | Considerations |
|---|---|---|---|
| Sealant patch | Quick application over a small gap or split | Short-term protection until a proper repair | Does not solve the cause and breaks down in the weather |
| Replacement flashing | New metal formed to fit the junction | Chimneys, walls, vents and skylights | Takes longer but is the lasting answer for failed junctions |
| Sheet replacement | Rusted or damaged sheets swapped for new | Local damage on an otherwise sound metal roof | Colour may not match older weathered sheets exactly |
| Tile replacement | Cracked or broken tiles swapped individually | Isolated tile damage | Older profiles can be difficult to find, so we check first |
Finding the fault
Where Roof Leaks Usually Start
These are the places we check first, because they fail most often.
Valleys and Box Gutters
Debris holds water in these low points, and worn metal eventually lets it through.
Chimney and Wall Junctions
Movement and age open up the joins where the roof meets a vertical surface.
Roof Penetrations
Flues, vents and aerials rely on seals that perish well before the roof does.
Fixings and Laps
Loose screws and poorly lapped sheets can let in wind-driven rain.
Repair process
How We Repair a Roof
- 1
Describe the Leak
Tell us when it appears, whether wind makes it worse and where you see it.
- 2
Trace the Source
We inspect from above and, where we can, from inside the roof space.
- 3
Explain the Fix
You see photos of the fault and a written price for the repair.
- 4
Complete the Repair
Damaged parts are removed and replaced, not simply covered over.
- 5
Check the Result
We clean the work area and confirm the repair has addressed the fault.
After a storm
What to Do When Your Roof Is Damaged
Your safety comes first, especially if a storm has brought down branches or power lines.
Stay Off the Roof
Wet roofs are dangerous. Leave inspection to someone with the right equipment.
Contain the Water
Move belongings, put down buckets and turn off lights near wet ceilings.
Record the Damage
Take photos from the ground and inside. Your insurer may ask for them.
Common repairs
Repairs We Are Often Asked to Do
Flashing
Leak beside a brick chimney
Old sealant removed and a new flashing fitted and fixed into the mortar joint.
Valley
Stain below a rusted valley
Tiles lifted, the valley iron replaced and the tiles relaid.
Storm
Sheet lifted in strong wind
Sheet re-fixed or replaced and nearby fixings checked.
Service areas
Roof Repairs Across Launceston
We repair metal and tile roofs throughout these suburbs.
Related services
When a Repair Is Not the Whole Answer
Roofing Services
Not sure what you need? Start with a full roof assessment.
View serviceRoof Replacement
When rust or damage has spread too far to patch.
View serviceResidential Roof Installation
When building or extending and a new roof is needed.
View serviceRoof Restoration
When tiles are sound but ridges and coating are tired.
View serviceRoof Maintenance
A yearly check helps stop small faults becoming leaks.
View serviceCommercial Roofing
Leak repairs for shops, offices and warehouses.
View serviceColorbond Roofing Installation
Move from a failing roof to a new steel cover.
View serviceTile Roofing Installation
Replacing a damaged tile roof with a new one.
View serviceAsbestos Roof Removal And Replacement
Damaged older cement sheet must be assessed before any repair.
View servicePricing
Roof Repair Costs in Launceston
A repair is priced on the fault, the access and the parts. We confirm the cause first, so you are not paying for guesswork.
| Single fault, easy access | Usually the most straightforward type of repair |
|---|---|
| Valley or flashing replacement | Tiles or sheets may need to be lifted and relaid |
| Storm damage | Depends on what failed and what it damaged |
Questions
Roof Repairs Launceston: Questions
Why does my roof only leak in some storms?
Wind direction often makes the difference. Rain driven at a certain angle can get under a lap or flashing that stays dry the rest of the time.
Can one broken tile really cause damage?
Yes. Water can get onto the sarking or straight into the ceiling space, and repeated wetting can stain ceilings and damage insulation.
Is silicone a proper roof repair?
It can help for a short time. On most roofs it is not a lasting fix, because the join moves and the sealant weathers.
Will insurance pay for my roof repair?
That depends on your policy and the cause of the damage. We can provide photos and a written description of what we found for your insurer.
Can old roof tiles be matched?
Often, but some profiles are no longer made. We check for matching or compatible tiles before we commit to a repair.
Next step
Have a Leaking Roof? Get It Repaired Properly
Send us the suburb, the roof type and a photo of the damage. We will tell you the next step and arrange an inspection.
Why leaks come back
The Mistake That Makes Roof Leaks Return
The most common reason for a repeat leak is that the first repair treated the stain, not the cause. Water follows the roof structure, so the obvious spot is often the wrong spot.
A proper repair may mean lifting surrounding tiles or removing a whole flashing, which takes longer than a dab of sealant. The extra time is what stops you calling someone again next winter.
Wet insulation and damp ceilings can also hold moisture long after the leak has been fixed, so a stain may take time to dry out once the repair is done.