House Re-Roofs
Old iron or tiles removed and replaced with a new steel cover.
Colorbond Roofing Launceston
Colorbond Roofing Installation Launceston Homeowners Trust
Colorbond roofing installation in Launceston is a popular way to replace an old iron or tile roof. Steel is light, comes in long lengths and suits many pitches and house styles.
The sheet is only part of the job. Fixings, flashings, ridge details and how the sheets are set out all decide how the roof performs.
- Re-roofs and new builds
- Choice of colours
- Matching flashings
- Gutters and fascias
Applications
Where We Install Colorbond
New Homes and Additions
Steel roofs installed at frame stage and tied into any existing roof.
Sheds and Carports
Roofs and gutters for garages, carports and outbuildings.
Profiles
Choosing a Sheet Profile
Corrugated
The traditional wave profile, and a natural fit on older homes and character houses.
Trimdek-Style Rib
Wider, flatter pans with a more contemporary look and good drainage at lower slopes.
Standing Seam
Concealed fixings and strong lines for architectural homes.
Steel comparison
Colorbond and Other Metal Options
Steel products vary in appearance and in where they suit best.
| Option | Characteristics | Typical applications | Considerations |
|---|---|---|---|
| Colorbond steel | Pre-painted steel with a baked factory finish | Most homes and sheds | Colour stays consistent, and sheets must be handled carefully to avoid scratches |
| Zincalume steel | Unpainted metallic-coated steel | Sheds and low-cost projects | Bright finish that dulls over time and limits colour choice |
| Colorbond Ultra | Steel with a stronger metallic coating | Areas with more severe exposure | Usually costs more and is not needed on every site |
Getting it right
Details That Make a Steel Roof Last
Most problems with steel roofs come down to installation details.
Correct Pitch
Each profile has a minimum slope. Custom Orb, for instance, is rated down to 5 degrees.
Compatible Fixings
Screws and flashings must suit the sheet to avoid corrosion at contact points.
Swarf Removal
Metal filings left on sheets rust and mark the finish, so we clear them as we go.
Sarking and Insulation
Underlay and blankets help to manage condensation and noise under steel.
Installation process
How We Install a Colorbond Roof
- 1
Measure and Advise
We measure the roof and check pitch, frame and drainage.
- 2
Choose Colour and Profile
We compare options and confirm them in the quote.
- 3
Prepare the Roof
Old materials come off and battens are adjusted where required.
- 4
Fix Sheets and Flashings
Sheets are set out square and fixed to the required pattern.
- 5
Clean and Hand Over
Swarf is removed and the warranty details are passed on.
Choosing a colour
Picking the Right Colour
Colour decisions affect how a home looks and how a roof performs.
Heat and Colour
Light colours reflect more sun, while dark roofs absorb more heat in summer.
Street Appeal
Look at brick, cladding and trim colours together before deciding.
Neighbour Glare
Very reflective finishes may need a second thought near neighbours.
Common installations
Colorbond Roofs We Are Asked About
Re-roof
Old iron on a timber home
Replaced with corrugated steel and new flashings.
Addition
Modern rear living room
Low-slope rib profile tied into the main roof.
Shed
Double garage in the backyard
New roof and gutters supplied to suit the house colours.
Service areas
Colorbond Roofs Across Launceston
We install Colorbond steel roofs in these suburbs.
Related services
Considering Other Options
Roofing Services
Compare all our roof services.
View serviceRoof Repairs
Fixing faults on an existing metal roof.
View serviceRoof Replacement
Plan a full change of roof material.
View serviceResidential Roof Installation
Fit a steel roof into a new home plan.
View serviceRoof Restoration
Restoring tiles instead of replacing them.
View serviceRoof Maintenance
Keep your new steel roof clean and clear.
View serviceCommercial Roofing
Long-run sheeting for commercial buildings.
View serviceTile Roofing Installation
A tile finish instead of steel.
View serviceAsbestos Roof Removal And Replacement
Removing old cement sheet before fitting steel.
View servicePricing
Colorbond Roof Installation Costs
We price from measured roof areas. Profile, colour range and how much of the old roof must come off all affect the figure.
| Over new frame | No strip-out, so usually the simplest install |
|---|---|
| Iron to steel re-roof | Old sheet removal and possible batten repairs |
| Tile to steel | Includes tile removal and batten changes |
Questions
Colorbond Roofing Launceston: FAQs
Is Colorbond noisy in the rain?
Steel can be noisier than tile if it is not insulated. Roof blankets and proper fixing make a noticeable difference.
Can Colorbond replace my tile roof?
In most cases, yes. The battens need changing to suit the sheets, and the lighter roof is not a problem for a frame built to carry tile.
What warranty does Colorbond have?
Warranties are issued by the manufacturer and depend on the product and location. We pass on the relevant details and can help you check eligibility.
Will a dark roof make my house hot?
Darker roofs absorb more heat. Insulation and ventilation matter, and lighter colours reflect more of the summer sun.
Can I get gutters to match?
Yes. Gutters, downpipes and flashings are available in matching or contrasting colours.
Next step
Ready for a New Colorbond Roof?
Tell us the size of the home and what is on the roof now. We will measure up and give you a written quote.
Avoiding problems
Why Metal Roof Fixings and Flashings Matter
Metals do not all get along. When incompatible metals touch and get wet, one of them can corrode much faster, so water running off copper or lead can damage steel below it.
Fixings need to suit the sheet and the frame, and they need to go in at the correct spacing. Under-fixed sheets can lift in strong wind, while over-tightened screws can crush their seals.
These details cannot be seen from the ground. It pays to ask how they will be handled before you accept a quote.